Buy Direct DRILL DOCTOR 750X 3/32″ – 3/4″ Capacity Drill Sharpening Machine

Drill Doctor Sharpener for Sharp Drilling Bits. Drill Doctor makes the sharpening of dull and broken drill bits comfortable and quicker. It allows for standard 118° or 135° angle sharpening of various bits, such as high-speed steel, carbide, tin-coated, cobalt, masonry, and bits with a split point. Moreover, you can carve out split points on standard bits with this sharpening machine. Varying angles help you customize your drill bits. Drill Doctor 500X sharpening machine can sharpen 3/32 to 1/2 inch large threading bits, either standard or twisted ones. For achieving precision, the machine uses one-piece alignment with flexible adjusting methods. The jaws of the sharpening chuck are longer so that they can hold the bit accurately to get the best results. Moreover, jaw guides are provided to prevent the twisting of jaws when holding smaller bits. The chuck has to be rotated in an even number of half turns (from 20 to 40 half turns) with light pressure applied. Along with standard sharpening ports, a split-point port is also provided on the Drill Doctor Sharpener to be used for sharpening the split-point bits or carving out a split point on standard bits. The metal split-point port is designed to prevent over-splitting. Further, the diamond 180-grit sharpening wheel offers super-sharp bits, and they can be replaced easily with new grit wheels if they are worn out after prolonged use. Drill Doctor 500X drill bit sharpener weighs 15 lbs., and it comes in a tough and durable case. It is a precision tool, and thus, it has to be cleaned regularly to remove dust and grit that can harm the ports and chucks. Sharpens dull or broken bits in less than 60 seconds!

Benefits

• With the Drill Doctor sharpening machine, you can customize your bits by sharpening them at different angles.
• Its unique one-piece alignment method, along with long chuck jaws, provides accurate sharpening.
• Drill Doctor drill bit sharpener is durable and provides long-lasting performance if maintained properly.

Applications

• Drill Doctor drill bit sharpener is meant to be used for 3/32 to 1/2 inch large drilling bits, either standard or twisted.
• You can sharpen your bits that are made of HSS, carbide, cobalt, tin-coated, etc. with this machine.
• Drill Doctor sharpening machine can also be utilized for split-pointing your drill bits.

Features

• Sharpens standard-twist bits from 3/32″ – 3/4″ with a single, convenient chuck.
• Sharpens high-speed steel, masonry, carbide, cobalt, TiN-coated and split-point bits.
• Adjustable material take-off lets you set the amount of material taken off based on the amount of damage on the bit.
• Custom point lets you adjust the point angle from 115° to 140°.
• Creates split-point bits from standard bits.
• One-piece alignment system improves precision, and adjustability.
• Longer jaws hold bit more precisely and jaw guides eliminate jaw twisting on small bits.
• Features a durable, metal split-point port designed to reduce oversplitting.
• Quick change diamond sharpening wheel means no tools are needed to change worn or different grit wheels.
• Variable alignment lets you adjust, chisel and relief angles to customize your bits.