Mi-T-M MH-0190-0M11 – Kerosene Forced Air Heater Portable Heater Direct From Factory

Mi-T-M MH-0190-0M11 – Kerosene Forced Air Heater Portable Heater

MODEL: MH-0190-0M11

MH-0190-0M11

The portable kerosene forced air heaters provide dependable heat for large areas. They feature built-in temperature control and sure start ignition.

Motor
Heavy-duty, cast aluminum enclosed electric motor

Burner Head
One-piece cast aluminum

Components
Easy assembly · Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Flat-free tires

Factory Tested for Multiple Fuels
Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel · Not approved for bio-fuel

Important Notes
-Not for use in residential living areas or inadequately ventilated areas
-Proper ventilation required during operation
-Must be plugged into an approved standard electrical outlet for operation

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information. These specifications are estimates only.

Optional Accessoriess (Not Included)

Specifications

Heat Output: 190,000 BTU

Hot-Air Flow: 409 CFM

Air Pump Pressure: 7.5 PSI

AC Power: 120V, 60Hz, 2.5 Amps

Motor Size: 1/2 HP

Fuel Tank Capacity: 13.2 gallons

Fuel Consumption: 1.37 gal./hr.

Max. Operating Hours: 10.0 hours

Heating Area: 4,750 sq. ft.

Multi-Fuel Capable: Yes

Digital Temp. Read-Out: Yes

Error Indicator Read-Out: Yes

Net Weight: 62.00 lbs.

Shipping Weight: 70.00 lbs.

Length: 41.00 in.

Width: 17.00 in.

Height: 22.00 in.